|
Product Details:
|
| Material: | Duplex Stainless Steel | Name: | Duplex Stainless Fittings |
|---|---|---|---|
| Grade: | S32250/2205/S31803 | Sch: | 40 |
| Size: | 1 1/2" | Application: | Oil/Gas/Water System |
| High Light: | UNS S32760 Seamless Equal Tee,ASTM A812 Seamless Equal Tee,Sch40 Seamless Equal Tee |
||
ASTM A812 UNS S31803 S32750 S32760 Seamless Equal Tee Super Duplex Pipe Fittings
APPLICATIONS
Chemical processing equipment, plup and paper industr bleachin equipment, desalination plant seawater piping, food and beverage industry, pharmaceuticals, and hydrometallurgy.
S31254 is a high performance austentic stainless steel. Its high alloying elements content imparts excellent resistance to uniform, pitting and crevice corrosion, and stress cprrosion cracking, It was riginally developed to withstand the corrosion of acids, especially in the presence of halide ions, such as hydrochloric acid, hydrochloric acid, phosphoric acid, and sulphuric acid contaminated with chlorides. In certain environments it is an alternative to more expensive Alloy alloys and titanium alloys.
| Products Name | Fittings |
| Material | Stainless Steel Special Alloy |
| Brand | METAL. |
| Standard | GB DIN ISO JIS ASTM |
| Thickness | As Request |
| Length | As Request |
| Width | 1000mm/1219mm/1220mm/1500mm/1800mm/2000mm |
| Finish | 2B embossed, vibration,mirror, Hairline |
| Certificate | ISO,SGS,IBR,etc. |
| Grade | N08810 N08825 N06600 N06625 4J36 S31254 S31050 00Cr18Ni4Mo3 630 201 202 301 302 305 304H 304 304L 316 316L 309S 310S 317 321 410 430 904L Duplex etc |
Duplex
Duplex stainless steels have a mixed microstructure of austenite and ferrite, the aim being to produce a 50/50 mix, although, in commercial alloys, the mix may be 40/60 respectively.
Duplex steels have improved strength over austenitic stainless steels and improved resistance to localised corrosion, particularly pitting, crevice corrosion and stress corrosion cracking. They are characterised by high chromium (19–28%) and molybdenum (up to 5%) and lower nickel contents than austenitic stainless steels. The most used duplex stainless steels are the 2205 (22% Chromium, 5% Nickel) and the 2507 (25% Chromium, 7% Nickel); 2507 is known as “super duplex” due to its higher resistance to corrosion.
The mechanical properties of Duplex steels are approximately double those of singular austenitic steels, and resistance to stress corrosion cracking is far superior to type 316 stainless steel in chloride solutions. Duplex steel has a ductile or brittle transition at approximately -50 degrees.
Super Duplex Stainless Steel is known to have better stress corrosion, cracking resistance and mechanical properties than any other type of steel. Super Duplex is an austenitic-ferritic iron chromium – nickel alloy with molybdenum addition. It has good resistance to pitting and a very good tensile strength and high resistance to stress corrosion cracking at moderate temperatures, compared to that of conventional austenitic stainless steels.
| GRADE | UNS NO | DIN/WERKSTOFF |
| DUPLEX | S31803/S32205 | 1.4462 |
| SUPER DUPLEX | S32760/S32750 | 1.4501/1.4410 |
Super duplex is a stainless steel with a dual phase microstructure, it is made up of roughly 50% of austenitic and 50% of ferrite.
Super Duplex. Super Duplex Stainless Steel is known to have better stress corrosion, cracking resistance and mechanical properties than any other type of steel. Super Duplex is an austenitic-ferritic iron chromium – nickel alloy with molybdenum addition.
A duplex communication system is a point-to-point system composed of two or more connected parties or devices that can communicate with one another in both directions.
The main difference between simplex, half duplex, and full duplex is that in a simplex mode of transmission the communication is unidirectional whereas, in the half-duplex mode of transmission the communication is two directional but the channel is alternately used by the both the connected device.
We are manufacturer ,You can see the Alibaba certification.
Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Yes, we could offer the sample for free charge but need pay the cost of freight.
Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before
If the quantity of order is not very big,we could send them to you by express delivery,such as TNT,DHL,UPS OR EMS etc.
If order is big ,we will advise you use Air Shipping or Sea Shipping through your nominated forwarder agent.Our long-term cooperated agent also available.
Contact Person: Ms.
Tel: 13524668060
