China Nickel Alloy Pipe manufacturer

TOBO ALLOY GROUP

TOBO Alloy Group is a mature, steady and energetic high-tech company, specializing in manufacture of high-temperature alloys and corrosion resistant alloys, such as Hastelloy, Haynes, Monel, Inconel, Incoloy and nickel.

News

November 18, 2021

ANSI B16.5 RF 300LBS Weld Neck Flange ASTM A182 F51 Welding Neck Flange

amy@tobo-group.com

 

ANSI B16.5 RF 300LBS Weld Neck Flange , Oil / Gas System ASTM A182 F51 NPS Long Welding Neck Flange

 

We are professional pipe & pipe fittings supplier, and we have our own factory, our main products including plate, coil& strip, flanges, pipes&tubes, valves and more pipe fittings.
 
The materials including: copper nickel, super duplex stainless steel, duplex, super duplex stainless steel, stainless steel, alloy steel and carbon steel.
 
Products Name Plate/Coil/Sheet
Material Stainless Steel Special Alloy
Brand Tisco,Baosteel,Lisco, etc.
Standard GB DIN ISO JIS ASTM
Thickness 0.3-6mm (Cold Rolled), 3-100mm(Hot Rolled)
Length As Request
Width 1000mm/1219mm/1220mm/1500mm/1800mm/2000mm
Finish 2B embossed, vibration,mirror, Hairline
Certificate ISO,SGS,IBR,etc.
Grade N08810 N08825 N06600 N06625 4J36 S31254 S31050 00Cr18Ni4Mo3 630 201 202 301 302 305 304H 304 304L 316 316L 309S 310S 317 321 410 430 904L Duplex etc
 
Below are some type of our flange:

 

Main Flange

latest company news about ANSI B16.5 RF 300LBS Weld Neck Flange ASTM A182 F51 Welding Neck Flange  0

Duplex

 

Duplex stainless steels have a mixed microstructure of austenite and ferrite, the aim being to produce a 50/50 mix, although, in commercial alloys, the mix may be 40/60 respectively.

Duplex steels have improved strength over austenitic stainless steels and improved resistance to localised corrosion, particularly pitting, crevice corrosion and stress corrosion cracking. They are characterised by high chromium (19–28%) and molybdenum (up to 5%) and lower nickel contents than austenitic stainless steels. The most used duplex stainless steels are the 2205 (22% Chromium, 5% Nickel) and the 2507 (25% Chromium, 7% Nickel); 2507 is known as “super duplex” due to its higher resistance to corrosion.

The mechanical properties of Duplex steels are approximately double those of singular austenitic steels, and resistance to stress corrosion cracking is far superior to type 316 stainless steel in chloride solutions. Duplex steel has a ductile or brittle transition at approximately -50 degrees.

Super Duplex

Super Duplex Stainless Steel is known to have better stress corrosion, cracking resistance and mechanical properties than any other type of steel. Super Duplex is an austenitic-ferritic iron chromium – nickel alloy with molybdenum addition. It has good resistance to pitting and a very good tensile strength and high resistance to stress corrosion cracking at moderate temperatures, compared to that of conventional austenitic stainless steels.

 

GRADE UNS NO DIN/WERKSTOFF
DUPLEX S31803/S32205 1.4462
SUPER DUPLEX S32760/S32750 1.4501/1.4410

 

Super duplex is a stainless steel with a dual phase microstructure, it is made up of roughly 50% of austenitic and 50% of ferrite.

 

Super Duplex. Super Duplex Stainless Steel is known to have better stress corrosion, cracking resistance and mechanical properties than any other type of steel. Super Duplex is an austenitic-ferritic iron chromium – nickel alloy with molybdenum addition.

 

A duplex communication system is a point-to-point system composed of two or more connected parties or devices that can communicate with one another in both directions.

 

The main difference between simplex, half duplex, and full duplex is that in a simplex mode of transmission the communication is unidirectional whereas, in the half-duplex mode of transmission the communication is two directional but the channel is alternately used by the both the connected device.

FAQ

1. Are you trading company or manufacturer ?

We are manufacturer ,You can see the Alibaba certification.

2. How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

3. Do you provide samples ? is it free or extra ?

Yes, we could offer the sample for free charge but need pay the cost of freight.

4. What is your terms of payment ?

Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before

 

latest company news about ANSI B16.5 RF 300LBS Weld Neck Flange ASTM A182 F51 Welding Neck Flange  1

 

 

If the quantity of order is not very big,we could send them to you by express delivery,such as TNT,DHL,UPS OR EMS etc.

 

If order is big ,we will advise you use Air Shipping or Sea Shipping through your nominated forwarder agent.Our long-term cooperated agent also available.

 

Contact Details