ASME/ANSI B16.5 stainless steel RF nipo-flange
Nipoflange is used in the pipe industry like a weldolet or a nipolet for a 90° branch connection.
A Nipoflange is a combination of weldolet, nipolet and flange.
Two different pipe branch connectionsOn the run pipe side a nipoflange is designed like a weldolet.
That means the branch connection on the run pipe side is a welding connection. On the other side there
it has a flange connection. The flange connection can be designed according to customers requirements
(acc. To DIN or ANSI).
GENERAL CHARACTERISTICS OF ALLOY 601
Alloy 601 is a general-purpose nickel-chromium-iron engineering material for applications where resistance
to heat and corrosion is required. The alloy is very resistant to high-temperature oxidation – up to 2200 º F –
and has good resistance to aqueous corrosion. The alloy retains good strength at elevated temperatures.
Alloy Inconel 601 was designed to withstand high temperature exposure and severe corrosive conditions.
The alloy is not embrittled by long exposure to high temperatures, thanks to the nickel, chromium and aluminium
contents that together form a protective and adherent oxide film.
Product Description
| Product Name | Nipo Flange |
| Standard | ASME/ANSI B16.5/16.36/16.47A/16.47B/B16.48, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| Type | Special Flange: According to the drawing Picture |
| Materials |
Copper Nickel Alloy: ASTM B466 UNS C70600, ASTM B466 UNS C71500, CUNI90/10, CUNI70/30 Nickel Alloy: ASTM/ASME S/B366 UNS N08020, N04400, N06600, N06625, N08800, N08810, N08825, N10276,N10665,N10675 Carbon Steel: ASTM/ASME S/A105, ASTM/ASME S/A350 LF2, ASTM/ASME S/A694/A694M, F42, F52, F56, F60, F65, F70.... ASTM A516 GRADE 70 |
| Dimension | (150#,300#,600#): DN15-DN1500 900# : DN15-DN1000 1500#: DN15-DN600 2500#:D N15-DN300 |
| Test | Chemical Component Analysis, Mechanical Properties, Metallurgical Analysis, Impact Testing, Hardness testing , Ferrite Testing, Inter granular corrosion testing, X-ray Inspection (RT), PMI, PT, UT, HIC & SSC test, etc. or as your requirement |
| Certificates | API, ISO, SGS, BV, CE, PED, KOC, CCRC, PDO, CH2M HILL and etc. |
| Advantages |
1. Abundant stock and prompt delivery 2. Reasonable for whole packages and processes. 4. More than 150 customers spread worldwide. (Petrofac, G.S Engineer, Fluor, Hyundai Heavy industry, Kuwait National Oil, Petrobras, PDVSA, Petrol Ecuador, SHELL, etc.) |
| CHEMICAL ANALYSIS | |
|---|---|
| Ni | Nickel 58 – 63 |
| Cr | Chromium 21 – 25 |
| Al | Aluminum 1.0 – 1.7 |
| C | Carbon 0.10 max |
| Mn | Managanese 1.0 max |
| S | Sulfur 0.015 max |
| Si | Silicon 0.50 max |
| Cu | Copper 1.0 max |
| Fe | Iron Remainder |
APPLICATIONS
The heat resistance and corrosion resistance of Inconel 601 make it suitable for furnace parts in such operations
as annealing, carburizing, nitriding and other heat-treatment operations. The alloy is used in chemical processing
equipment and petrochemical processing equipment where its excellent corrosion resistance comes into full play.
The alloy is also used in nitric acid production.
Further important applications of this alloy are to be found in the pollution control, aerospace – where it is used
in jet-engine igniters – and power generation industries.
Other Products
Nickel Alloys WNRF Flanges : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys WNRF Flanges: Copper, Brass & Gunmetal
Incoloy Alloy Steel Flange : ASTM AB564 ,NO8800/ Alloy800, NO8810/ Alloy 800H, NO8811/Alloy 800HT
Hastelloy Steel Flange: ASTM AB564 , C276/ NO10276 , Monel Alloy 400 /NO4400, K500/NO5500,
FORGING Alloy 601
Inconel 601 is best forged, for large deformations, between 2250 and 1900 º F, but forging may be continued
to 1650 º F. The alloy shows low ductility between 1600 and 1200 º F and should not be forged in this temperature range.
HEAT TREATMENT
Alloy 601 cannot be hardened by heat treatment and only cold working will improve room-temperature strength.
Pub Time : 2021-09-22 18:16:15 >> News list
Contact Person: Ms.
Tel: 13524668060
