TOBO ALLOY GROUP
TOBO Alloy Group is a mature, steady and energetic high-tech company, specializing in manufacture of high-temperature alloys and corrosion resistant alloys, such as Hastelloy, Haynes, Monel, Inconel, Incoloy and nickel.
August 26, 2021
ASTM B564 UNS N06625 / ALLOY 625 1" 600# SCHXXS RF Spectacle FIGURE 8 BLANK BLIND STEEL FLANGE
1. Spectacle Flanges, Single Blinds, and ring spacer are crucial pipeline accessories when a section of the pipeline may need to be isolated from the rest. Single Blinds or Blanks are positive shut-off devices that prevent flow through a pipeline.
2.The products a according to the requirements of 590 can be used to the RF Flange as following standard: ANSI B16.5, SH3406, IS07005-1, GB9112~9124, HG20615.
3.The corrosive capacity is involved in the thickness of paddle blind, spacer and Figure 8 & the corrosive capacity is 1.3mm for c.s. Low-alloy & low-temperature steel and O for s.s.
4.Adopted to flat spacer. Adjust the thickness if adopt other spacer.
|Product Name||Spectacle Blind Flange|
|Standard||ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, 7S-15, 7S-43, 605, EN1092|
|Type||Spectacle Blind Flange Special Flange: According to the drawing Picture|
Nickel Alloy: ASTM/ASME S/B366 UNS N08020, N04400, N06600, N06625, N08800, N08810, N08825, N10276,N10665,N10675, Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Stainless steel: ASTM/ASME S/A182 F304, F304L, F304H, F316, F316L, F321, F321H, F347H
ASTM A350 LF1; LF2; A350 LF3 ;LF4;LF6;LF8
Copper Alloy:ASTM AB564 , NO6600/ Alloy 600, NO6625/ Alloy 625, Alloy 690, Alloy 718
Inconel Alloy Steel:ASTMAB564, NO8800/Alloy800, NO8810/Alloy800H, NO8811/Alloy 800HT
Carbon Steel: ASTM/ASME S/A105, ASTM/ASME S/A350 LF2, ASTM/ASME S/A694/A694M, F42, F52, F56, F60, F65, F70....ASTM/ASME S/A350 LF2, ASTM/ASME S/A694/A694M, F42, F52, F56, F60, F65, F70....
900# : DN15-DN1000
|Marking||Supply Logo + Standard + Size(mm) + HEAT NO +or as your requirement|
|Test||Chemical Component Analysis, Mechanical Properties, Metallurgical Analysis, Impact Testing, Hardness testing , Ferrite Testing, Intergranular corrosion testing, X-ray Inspection (RT), PMI, PT, UT, HIC & SSC test, etc. or as your requirement|
|Certificates||3.1. (Any third party certificate should be clarified before order)|